using the EN designation and compositions as given in EN 10088. Part 1 2 and 3 note steel 1.4162 is not included in the current edition of EN10088 but is Stainless steels find
1.4462 Stainless duplex austenitic-ferritic, chromium diagramm, are specified in the EN 10088-3. Tel. +49 2302 29 0 Fax +49 2302 29 4000 [email protected] Solution annealed R m 660 750 N/mm2 Depth of cut (mm) Feed rate (mm/r) Cutting speed (m/min) 6 0.5 110 3 0.4 140 1 0.2 175 Revision-No. 4462-1 Created:01.08.07 No responsibility is taken for the correctness of this information. 800
BS EN 10088-2:2014 Edition. BS EN 10088-2 was originally published in 1995. The second version, BS EN 10088-2:2005, has been superseded by BS EN 10088-2:2014. The tables shown here only have the 2014 tensile property ranges of the austenitic-ferritic (duplex) steels. Four new duplex grades, 1.4162, 1.4662, 1.4482, 1.4062 have been added.
BS EN 10088-3:2014 Stainless steels. Technical delivery Standard inspection document is now a test report 2.2 according to BS EN 10204; Mechanical values changed for austenitic grade 1.4372, for martensitic grades 1.4313, 1.4028, 1.4122, 1.4057 and for precipitation hardening grade 1.4606
DIN EN 1.4462 Duplex Stainless Steel X2CrNiMoN22-5-3 DIN EN 1.4462 Duplex Stainless Steel (X2CrNiMoN22-5-3 Material) DIN EN 1.4462 stainless steel (X2CrNiMoN22-5-3 Material) is an Austenitic-Ferritic duplex steel, which combines the excellent properties of austenite and ferrite, and has good resistance to pitting, surface and intergranular corrosion, and higher resistance to stress corrosion cracking. 1.4462 material also has good weldability
DIN EN 1.4462 Duplex Stainless Steel (X2CrNiMoN22-5-3 Material) DIN EN 1.4462 stainless steel (X2CrNiMoN22-5-3 Material) is an Austenitic-Ferritic duplex steel, which combines the excellent properties of austenite and ferrite, and has good resistance to pitting, surface and intergranular corrosion, and higher resistance to stress corrosion cracking. 1.4462 material also has good weldability
Designation systems for steels - Part 1:Steel namesEN 10027-1:2005 (E) 7 7.2 Additional symbols Additional symbols may be added to the principal symbols and assigned in accordance with 7.3 and 7.4. Additional symbols are divided into two groups, i.e. group 1 and group 2 (see 7.3 and 7.4). If the symbols for
EN 10088-2 Chemical Composition Stainless SteelEN 10088-2 Chemical Composition Stainless Steel. EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. A total of 83 stainless steel grades are listed, including 19 ferritic, 14 martensitic, 2 precipitation hardening, 40 austenitic and 8 austenitic-ferritic duplex grades. The chemical composition of these stainless steel are shown in this article.
EN 10088-2 was originally published in 1995. The second, current version, EN 10088-2:2005, has superseded EN 10088-2:1995, which was withdrawn by BSi on 20th June 2005. The tables shown here have the 2005 tensile strength property ranges of the 2 precipitation hardening steel 1.4542 and 1.4568.
EU EN 10088-1 1.4401 / 1.4401 Datasheet, chemical 1.4401 / 1.4401. EU EN 10088-1 1.4401 Stainless steels. List of stainless steels and Mechanical Properties, Chemical Element, Cross Reference.
Equivalent Specifications Columbus Stainless1.4878:Cr-Ni-(Mn) Austenitics:316L-1.4404:S31003 S31600:316L 316:X2CrNiMo17-12-2 X5CrNiMo17-12-2:1.4404 1.4401:Cr-Ni-(Mn) Austenitics:316L-1.4435:X2CrNiMo17-12-3 X2CrNiMo18-14-3 X3CrNiMo17-13-3 X2CrNiMo17-12-2 X5CrNiMo17-12-2:1.4432 1.4435 1.4436 1.4404 1.4401:Cr-Ni-(Mn) Austenitics:316LN:S31653 S31651:316LN 316N:X2CrNiMoN17-11-2
1.4162 (UNS S32101) is a low Ni-alloyed, the duplex microstructure contributes to the high strength and high resistance to stress corrosion cracking.
MATERIAL DATA SHEET - rostfrei-stahlNov 17, 2017 · 1.4162 Material No.:X2CrMnNiN22-5-2 Abbreviated name:Other material identification:ASME (incl. dual certification):UNS S32101 EN (incl. dual certification):1.4162 Scope of application:This data sheet applies for hot and cold rolled sheets and strips from our stock. Field of application:
METRIC Stainless hollow sections - Stalatube1.4162 450 650-900 30 1.4362 420 630 25 2) 1.4462 460 640-950 25 1) Fulfills the standard EN 10088-2 2) EDX2304 1) Available for dimensions up to 100 x 100 x 6 / 120 x 80 x 6 mm, 2) Available for dimensions up to 100 x 100 x 5 / 120 x 80 x 5 mm, 3) Available for dimensions up to 100 x
EN 10088-1:2014 (E) 3 . Foreword . This document (EN 10088-1:2014) has been prepared by Technical Committee ECISS/TC 105 Steels for heat treatment, alloy steels, free-cutting and stainless steels, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an
Stainless Steel EN 1.4301 AISI 304 X5CrNi18-10 UNSS30400Available forms for 1.4301 / AISI 304:Sheets/Plates:Bars:Tubes/Pipes:Fittings:ASTM A240 304:EN 10088 -3 1.4301:ASTM A312 UNS S30400:EN 10222-5 1.4301
Stainless steel flat products for building the grades in As the pre-existing EN 10088 parts 1, 2 and 3 are not application-specific and describe stainless steel grades and the delivery con-ditions of flat and long products in general terms, two new parts 4 (for flat products) and 5 (for long products) were written.
EN 10088-1 austenitic. 1.4301. List of stainless steels that can be used in contact with food Extract from the Italian Official Journal 4-2-2011 and from Legislative Decree OF ITALIAN GOVERNMENT no. 258 of December 21, 2010 and its amendments.
Forta LDX 2101 EN 1.4162, ASTM UNS S32101 stainless steel EN 10088-2:1.4162:EN 10088-3:1.4162:EN 10088-4:1.4162:IS 6911, AMENDMENT NO. 2:ISS 2101:Material Specification AM 611 Ed.5:1.4162:Note:For pressure purposes Forta LDX 2101 has a Particular Material Appraisal from TÜV and Inspecta. Maximum